Crosschain

Open in Claude

Gateways are contracts that enable cross-chain communication. These can either be a message source or a destination according to ERC-7786.

ERC7786Receiver: ERC-7786 cross-chain message receiver.
ERC7786OpenBridge: ERC-7786 "N out of M" gateway. Sends a message through M gateways and executes on the destination if N received it.

Developers can access interoperability protocols through gateway adapters. The library includes the following gateway adapters:

AxelarGatewayAdapter: ERC-7786 gateway adapter for Axelar.

`ERC7786OpenBridge`

import "@openzeppelin/contracts/crosschain/ERC7786OpenBridge.sol";

N of M gateway: Sends your message through M independent gateways. It will be delivered to the receiver by an equivalent bridge on the destination chain if N of the M gateways agree.

constructor(address owner_, address[] gateways_, uint8 threshold_)

public

supportsAttribute(bytes4) → bool

public

Getter to check whether an attribute is supported or not.

sendMessage(bytes recipient, bytes payload, bytes[] attributes) → bytes32 sendId

public

Using memory instead of calldata avoids stack too deep errors

receiveMessage(bytes32, bytes sender, bytes payload) → bytes4

public

This function serves a dual purpose:

It will be called by ERC-7786 gateways with message coming from the the corresponding bridge on the source chain. These "signals" are tracked until the threshold is reached. At that point the message is sent to the destination.

It can also be called by anyone (including an ERC-7786 gateway) to retry the execution. This can be useful if the automatic execution (that is triggered when the threshold is reached) fails, and someone wants to retry it.

When a message is forwarded by a known gateway, a ERC7786OpenBridge.Received event is emitted. If a known gateway calls this function more than once (for a given message), only the first call is counts toward the threshold and emits an ERC7786OpenBridge.Received event.

This function revert if:

the message is not properly formatted or does not originate from the registered bridge on the source chain.
someone tries re-execute a message that was already successfully delivered. This includes gateways that call this function a second time with a message that was already executed.
the execution of the message (on the IERC7786Receiver receiver) is successful but fails to return the executed value.

This function does not revert if:

A known gateway delivers a message for the first time, and that message was already executed. In that case the message is NOT re-executed, and the correct "magic value" is returned.
The execution of the message (on the IERC7786Receiver receiver) reverts. In that case a ERC7786OpenBridge.ExecutionFailed event is emitted.

This function emits:

ERC7786OpenBridge.Received when a known ERC-7786 gateway delivers a message for the first time.
ERC7786OpenBridge.ExecutionSuccess when a message is successfully delivered to the receiver.
ERC7786OpenBridge.ExecutionFailed when a message delivery to the receiver reverted (for example because of OOG error).

NOTE: interface requires this function to be payable. Even if we don't expect any value, a gateway may pass some value for unknown reason. In that case we want to register this gateway having delivered the message and not revert. Any value accrued that way can be recovered by the admin using the ERC7786OpenBridge.sweep function.

getGateways() → address[]

public

getThreshold() → uint8

public

getRemoteBridge(bytes chain) → bytes

public

getRemoteBridge(bytes2 chainType, bytes chainReference) → bytes

public

addGateway(address gateway)

public

removeGateway(address gateway)

public

setThreshold(uint8 newThreshold)

public

registerRemoteBridge(bytes bridge)

public

pause()

public

unpause()

public

sweep(address payable to)

public

Recovery method in case value is ever received through ERC7786OpenBridge.receiveMessage

_addGateway(address gateway)

internal

_removeGateway(address gateway)

internal

_setThreshold(uint8 newThreshold)

internal

_registerRemoteBridge(bytes bridge)

internal

OutboxDetails(bytes32 indexed sendId, struct ERC7786OpenBridge.Outbox[] outbox)

event

Received(bytes32 indexed receiveId, address gateway)

event

ExecutionSuccess(bytes32 indexed receiveId)

event

ExecutionFailed(bytes32 indexed receiveId)

event

GatewayAdded(address indexed gateway)

event

GatewayRemoved(address indexed gateway)

event

ThresholdUpdated(uint8 threshold)

event

RemoteRegistered(bytes remote)

event

UnsupportedNativeTransfer()

error

ERC7786OpenBridgeInvalidCrosschainSender()

error

ERC7786OpenBridgeAlreadyExecuted()

error

ERC7786OpenBridgeRemoteNotRegistered(bytes2 chainType, bytes chainReference)

error

ERC7786OpenBridgeGatewayAlreadyRegistered(address gateway)

error

ERC7786OpenBridgeGatewayNotRegistered(address gateway)

error

ERC7786OpenBridgeThresholdViolation()

error

ERC7786OpenBridgeInvalidExecutionReturnValue()

error

RemoteAlreadyRegistered(bytes remote)

error

`AxelarGatewayAdapter`

import "@openzeppelin/contracts/crosschain/axelar/AxelarGatewayAdapter.sol";

Implementation of an ERC-7786 gateway destination adapter for the Axelar Network in dual mode.

The contract implements AxelarExecutable's ERC7579DelayedExecutor._execute function to execute the message, converting Axelar's native workflow into the standard ERC-7786.

NOTE: While both ERC-7786 and Axelar do support non-evm chains, this adaptor does not. This limitation comes from the translation of the ERC-7930 interoperable address (binary objects -- bytes) to strings. This is necessary because Axelar uses string to represent addresses. For EVM network, this adapter uses a checksum hex string representation. Other networks would require a different encoding. Ideally we would have a single encoding for all networks (could be base58, base64, ...) but Axelar doesn't support that.

Events

RegisteredRemoteGateway(remote)
RegisteredChainEquivalence(erc7930binary, axelar)

AxelarExecutable

IAxelarExecutable

Ownable

OwnershipTransferred(previousOwner, newOwner)

IERC7786GatewaySource

MessageSent(sendId, sender, receiver, payload, value, attributes)

Errors

UnsupportedNativeTransfer()
InvalidOriginGateway(axelarSourceChain, axelarSourceAddress)
ReceiverExecutionFailed()
UnsupportedChainType(chainType)
UnsupportedERC7930Chain(erc7930binary)
UnsupportedAxelarChain(axelar)
InvalidChainIdentifier(erc7930binary)
ChainEquivalenceAlreadyRegistered(erc7930binary, axelar)
RemoteGatewayAlreadyRegistered(chainType, chainReference)

AxelarExecutable

Ownable

OwnableUnauthorizedAccount(account)
OwnableInvalidOwner(owner)

IERC7786GatewaySource

UnsupportedAttribute(selector)

constructor(contract IAxelarGateway gateway, address initialOwner)

public

Initializes the contract with the Axelar gateway and the initial owner.

getAxelarChain(bytes input) → string output

public

Returns the Axelar chain identifier for a given binary interoperable chain id.

getErc7930Chain(string input) → bytes output

public

Returns the binary interoperable chain id for a given Axelar chain identifier.

getRemoteGateway(bytes chain) → bytes

public

Returns the address of the remote gateway for a given binary interoperable chain id.

getRemoteGateway(bytes2 chainType, bytes chainReference) → bytes

public

Returns the address of the remote gateway for a given chainType and chainReference.

registerChainEquivalence(bytes chain, string axelar)

public

Registers a chain equivalence between a binary interoperable chain id and an Axelar chain identifier.

registerRemoteGateway(bytes remote)

public

Registers the address of a remote gateway.

supportsAttribute(bytes4) → bool

public

Getter to check whether an attribute is supported or not.

sendMessage(bytes recipient, bytes payload, bytes[] attributes) → bytes32

external

Endpoint for creating a new message. If the message requires further (gateway specific) processing before it can be sent to the destination chain, then a non-zero outboxId must be returned. Otherwise, the message MUST be sent and this function must return 0.

MUST emit a IERC7786GatewaySource.MessageSent event.

If any of the attributes is not supported, this function SHOULD revert with an IERC7786GatewaySource.UnsupportedAttribute error. Other errors SHOULD revert with errors not specified in ERC-7786.

_execute(bytes32 commandId, string axelarSourceChain, string axelarSourceAddress, bytes adapterPayload)

internal

Execution of a cross-chain message.

In this function:

axelarSourceChain is in the Axelar format. It should not be expected to be a proper ERC-7930 format
axelarSourceAddress is the sender of the Axelar message. That should be the remote gateway on the chain which the message originates from. It is NOT the sender of the ERC-7786 crosschain message.

Proper ERC-7930 encoding of the crosschain message sender can be found in the message

_stringifyAddress(bytes2 chainType, bytes addr) → string

internal

ERC-7930 to Axelar address translation. Currently only supports EVM chains.

RegisteredRemoteGateway(bytes remote)

event

A remote gateway has been registered for a chain.

RegisteredChainEquivalence(bytes erc7930binary, string axelar)

event

A chain equivalence has been registered.

UnsupportedNativeTransfer()

error

InvalidOriginGateway(string axelarSourceChain, string axelarSourceAddress)

error

ReceiverExecutionFailed()

error

UnsupportedChainType(bytes2 chainType)

error

UnsupportedERC7930Chain(bytes erc7930binary)

error

UnsupportedAxelarChain(string axelar)

error

InvalidChainIdentifier(bytes erc7930binary)

error

ChainEquivalenceAlreadyRegistered(bytes erc7930binary, string axelar)

error

RemoteGatewayAlreadyRegistered(bytes2 chainType, bytes chainReference)

error

`ERC7786Receiver`

import "@openzeppelin/contracts/crosschain/utils/ERC7786Receiver.sol";

Base implementation of an ERC-7786 compliant cross-chain message receiver.

This abstract contract exposes the receiveMessage function that is used for communication with (one or multiple) destination gateways. This contract leaves two functions unimplemented:

ERC7786Receiver._isKnownGateway, an internal getter used to verify whether an address is recognised by the contract as a valid ERC-7786 destination gateway. One or multiple gateway can be supported. Note that any malicious address for which this function returns true would be able to impersonate any account on any other chain sending any message.

ERC7786Receiver._processMessage, the internal function that will be called with any message that has been validated.

Functions

receiveMessage(receiveId, sender, payload)
_isKnownGateway(instance)
_processMessage(gateway, receiveId, sender, payload)

IERC7786Receiver

Errors

ERC7786ReceiverInvalidGateway(gateway)
ERC7786ReceivePassiveModeValue()

IERC7786Receiver

receiveMessage(bytes32 receiveId, bytes sender, bytes payload) → bytes4

public

Endpoint for receiving cross-chain message.

This function may be called directly by the gateway.

_isKnownGateway(address instance) → bool

internal

Virtual getter that returns whether an address is a valid ERC-7786 gateway.

_processMessage(address gateway, bytes32 receiveId, bytes sender, bytes payload)

internal

Virtual function that should contain the logic to execute when a cross-chain message is received.

ERC7786ReceiverInvalidGateway(address gateway)

error

ERC7786ReceivePassiveModeValue()

error

Crosschain

Functions

Events

Errors

Functions

Events

Errors

Functions

Errors

On this page